English - 94 When selecting the Cable TV system:Press the ENTER button to start the auto program.Press the or to select the correct analog signalcable system source from among STD, HRC, andIRC, then press the ENTER button. If you haveDigital cable TV, select the cable system signalsource for both Analog and Digital. STD, HRC, and IRC identify various types ofcable TV systems. Contact your local cablecompany to identify the type of cable system thatexists in your particular area. At this point thesignal source has been selected.5 The TV begins memorizing all available stations. If you want to stop Auto Programming, pressthe ENTER button. The Would you like to stopthe auto channel. message will be displayed.Select Yes by pressing the or button.Press the EXIT button to exit.Auto ProgramAuto Program in progress.DTV Air : 5 Air : 3Air 6768 %StopEnter ReturnAuto ProgramWould you like to stop the auto channel.DTV Air : 5 Air : 3Yes No68 %EnterMove ReturnViewing the Channel ListsYou can display a list of all channels, added channels oryour favorite channels.1 Press the MENU button to display the menu.Press the or button to select Channel, thenpress the ENTER button.2 Press the or button to select Channel List,then press the ENTER button.3 Press the or button to select All, Added orFavorite, then press the ENTER button.To toggle between your all channels, add channels,or favorite channels, use the red button on theremote control. Red button: Press repeatedly to select All,Added, or Favorite. Green button: Press to add all channelsdeleted. Yellow button: Press to delete all channelsmemorized.Antenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength ChannelT VEnterMove ReturnAll Added Favorite Default List Mode : All Channel ListT VEnterMove ReturnAddedList Mode Delete AllMove EnterDTV Air 2DTV Air 2Air 3Air 4Air 5Air 6Air 7DTV Air 7-1Air 9DTV Air 9-1Air 10Air 11DTV Air 11-1Air 12Air 13Air 14Air 15Air 16ReturnAdd All