Samsung 450 User Manual

Also see for 450 Series: E-manual E-manual User manual User manual Quick setup guide

Contents

English - 54troubleshooting for anynet+Symptom Solutionanynet+ does not work. ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+devices only.■ Connect only one receiver (home theater).■ Check if the Anynet+ device power cord is properly connected.■ Check the Anynet+ device’s Video/Audio/HDMI cable connections.■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.■ Check whether the TV remote control is in TV mode.■ Check whether it is Anynet+ exclusive remote control.■ Anynet+ doesn’t work at a certain condition. (Searching channels, Plug & Play, etc.)■ When connecting or removing the HDMI cable, please make sure to search devicesagain or restart your TV.■ Check if the Anynet+ Function of Anynet+ device is set on.I want to start anynet+. ■ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+(HDMI-CEC) is set to On in the Anynet+ Setup menu.■ Press the tV button on the TV remote control to switch to TV. Then press the toolSbutton to show the Anynet+ menu and select a menu you want.I want to exit anynet+. ■ Select View tV in Anynet+ menu.■ Press the SourCE button on the TV remote control and select a device other thanAnynet+ devices.■ Press any of Ch</>, PrE-Ch to change the TV mode.(Note that the channel button operates only when a tuner-embedded Anynet+ deviceis not connected.)the message “Connecting toanynet+ device...” appears on thescreen.■ You cannot use the remote control when you are configuring Anynet+ or switching to aview mode.■ Use the remote control when the Anynet+ setting or switching to view mode iscomplete.the anynet+ device does not play. You cannot use the play function when Plug & Play is in progress.the connected device is notdisplayed.■ Check whether or not the device supports Anynet+ functions.■ Check whether or not the HDMI cable is properly connected.■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.■ Search Anynet+ devices again.■ You can connect an Anynet+ device using the HDMI cable only. Some HDMI cablesmay not support Anynet+ functions.■ If it is terminated by an abnormal situation such as disconnecting the HDMI cable orpower cord or a power failure, please repeat the device scan.the tV program cannot berecorded.Check whether the antenna jack on the recording device is properly connected.