English - 33Fine Tuning Analog Channels1. Press the MENU button to display the menu.Press the or button to select "Channel", then press the ENTER button.2. Press the or button to select "Fine Tune", then press the ENTER button.3. Press the or button to adjust the fine tuning.To store the fine tuning setting in the TV’s memory, press the ENTER button.If you do not store the fine-tuned channel in memory, adjustments are not saved.4. To reset the fine tuning setting, press the button to select "Reset",then press the ENTER button.Press the EXIT button to exit."*" will appear next to the name of fine-tuned channels.Only analog TV channels can be fine tuned.Use ne tuning to manually adjust a particular channel for optimal reception.Checking the Digital-Signal Strength1. Press the MENU button to display the menu.Press the or button to select “Channel”, then press the ENTER button.2. Press the or button to select “Signal Strength”, then press the ENTERbutton.If the signal strength meter indicates that the signal is weak, physically adjust yourantenna to increase the signal strength.Continue to adjust the antenna until you find the best position with the strongestsignal.Press the EXIT button to exit.Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfectreception quality or you will not receive them at all. So, unlike analog channels, you cannot ne tune a digital channel. You can,however, adjust your antenna to improve the reception of available digital channels.Signal StrengthEnter ReturnTVOKAdjust Save ReturnFine TuneAir 240ResetMove Enter ReturnFine TuneAir 240ResetAntenna : Air Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength ChannelMove Enter ReturnTVAntenna : Cable Auto Program Clear Scrambled Channel Channel List Name Fine Tune Signal Strength ChannelMove Enter ReturnTVAdjust Save ReturnFine TuneAir 24 *+3ResetFine Tuned