Samsung 451 User Manual

Also see for LN19A450C1D: User manual User manual User guide User manual

Contents

English-5Connecting a VCR1234If you have a “mono” (non-stereo)VCR, use a Y-connector (notsupplied) to hook up to the rightand left audio input jacks of theTV. If your VCR is stereo, youmust connect two cables.°Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.Each VCR has a different back panel configuration.When connecting a VCR, match the color of the connection terminal to the cable.°°5Connect the cable or antennato the ANT IN terminal on theback of the VCR.Connect an RF Cable betweenthe ANT OUT terminal on theVCR and the ANT IN terminalon the TV.Connect a Video Cable betweenthe VIDEO OUT jack on theVCR and the AV IN [VIDEO] jackon the TV.Unplug the cable or antennafrom the back of the TV.Connect Audio Cables betweenthe AUDIO OUT jacks on theVCR and the AV IN [R-AUDIO-L]jacks on the TV.Video ConnectionS-Video ConnectionTV Rear Panel1 RF Cable (Not supplied)3 Audio Cable (Not supplied)VCR Rear Panel12 Connect an S-Video Cablebetween the S-VIDEO OUT jackon the VCR and the AV IN[S-VIDEO] jack on the TV.3 Connect Audio Cables betweenthe AUDIO OUT jacks on theVCR and the AV IN [R-AUDIO-L]jacks on the TV.2 S-Video Cable (Not supplied)To begin, follow steps 1–3 inthe previous section to connectthe antenna or cable to yourVCR and your TV.An S-Video cable may be includedwith a VCR. (If not, check your localelectronics store.)Each VCR has a different backpanel configuration.When connecting a VCR, matchthe color of the connectionterminal to the cable.°°TV Rear Panel5 Audio Cable (Not supplied)3 RF Cable (Not supplied)4 Video Cable (Not supplied)VCR Rear Panel