Caution:Pulling,pushing,orclimbingontheTVmaycausetheTVtofall.Inparticular,ensureyourchildrendonothangoverordestabilizetheTV.DoingsomaycausetheTVtotipover,causingseriousinjuriesordeath.FollowallsafetyprecautionsprovidedintheincludedSafetyFlyerwithyourTV,Foraddedstabilityandsafety,youcanpurchaseandinstalltheantifalldeviceasdescribedbelow,The TV-Holder Kit (Sold Separately):The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screwappropriate for the wall or cabinet you intend to secure the Td-Holder string to. We recommend a size M4xL20 wood screw.Installing the rV-Holder1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included inthe TV-Holder Kit that is designated for your T_.Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.2.8,Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed.If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use amolly to anchor the screw.Tie the TV-Holder cord to the screw fastened on the wall or cabinet so that the TV is fixed. See the illustrations below.Install the TV close to the wall so that it does not fall.When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for safetypurposes,Check the cord occasionally to make sure it is secure.Before moving the TV, separate the connected cord first.4. Verify all connections are properly secured, Periodically check the connections for any sign of fatigue or failure. If you haveany doubt about the security of your connections, contact a professional installer.To purchase the rV-Holder Kit, contact Samsung Customer Care- In the United States: 1-800-SAMSUNG (1-800-726-7864)- In Canada: 1-800-SAMSUNG (1-800-726-7864)English 31