Getting StartedWhen the TV is initially powered on, basic settings proceed automatically,Connecting the power cord and antenna,VHF/UHFAntennantenna a e o u _eOrWhen the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press thePOWER (b button. Plug & Play is available only when the input source is set to TV.To return to the previous step, press the Red button.1 Selecting a languageSelecting Store Demoor Home UseSelecting an antenrPress the A or T button, then press the ENTERC_ button.Select the desired OSD (On Screen Display) language.Press the 41 or I_ button, then press the ENTERE_ button.• Select the Home Use mode. Store Demo Mode is for retailenvironments.• To return the unit's settings from Store Demo to Home Use(standard): Press the volume button on the TV. When yousee the volume OSD, press and hold MENU for 5 sec.POWERPress the A or _r button, then press the ENTERI_ button. Select Air, Cable or Auto.Selecung a channelSetting the ClockModeView the HDTVConnection GuidePress the A or T button, then press the ENTERE_ button. Select the channel sourceto memorize. When setting the antenna source to Cable, a step appears allowing you toass'gn numerical values (channel frequencies) to the channels. For more information, refer toChannel--_ Auto Program (p. 14).Press the ENTERI_ button at any time to interrupt the memorization process.Set the Clock Mode automatically or manually.• Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.• Manual: Allows you to manually set the current date and time (p. 20).The connection method for the best HD screen quality is displayed.Enjoy the "IV. Press the ENTERI_ button.if You Want to Reset This Feature...(_ MENU rlTl _ Setup _ Plug & Play _ ENTERI_English