You can control your set-top-box or satellite box with the Remote Control. To establishcontrol, you must first set up theIR extender cable. If you don't have an STB, skip thissection.Connect theIR extender cable to the TV's IR output connector.------I ~ r=l• (I]• •e cmiiKJ• s- The displayed image may differ depending on the model.' IR Out1 Connect theIR Extender1 Cable here.IPlace the transmitter endwithin 4 inches of the set-top-box's remote controlsensor.~ Position the transmitter end within 4 inches (1 0 em) of the set-top-box's remotecontrol sensor, pointing in the direction of the sensor. Make sure there are noobstacles between the transmitter end of theIR extender cable and the set-top - box or satellite box. Any obstacles will interfere with the transmission of theremote control signals.... Finalize control of your set-top or satellite box when you run Initial Setup.