30When you receive an off-hook voice announcement, you will hear theannouncement in the handset receiver or over the keyset speakerwhile continuing to speak to the original party.To answer the OHVA:• Press the flashing CALL button on your keyset. The originalparty is placed on hold allowing you to talk to the announcingparty.• To return to your first party, press the key corresponding to youroriginal call. This will disconnect the OHVA call.OHVA BLOCKYour keyset can be programmed with an OHVA Block (OHBLK) key.Pressing this key will prevent anyone from making and OHVA to youuntil you press the button again and cancel the blocking.OHVA REJECTYour keyset can be programmed with an OHVA Reject (REJECT)key. Pressing this key while receiving an OHVA call will disconnectthe voice announcement and return you to your original call.IN GROUP/OUT OF GROUPIf your keyset is assigned to a station ring group, you can temporarilyremove your keyset from the group. While you are out of the group,you can receive calls to your extension number but not calls to thegroup number.• Press the IN/OUT key. It will light red when your keyset is in thegroup.• Press the IN/OUT key again to exit the group and turn the lightoff. Repeat as necessary.If you do not have an IN/OUT key:• Dial 53 plus the group number, e.g., 503, followed by 0 to exitthe group or 1 to enter the group.• Repeat as necessary.