36MANUAL TIMERDisplay phone users may use this feature to time an incoming oroutgoing call or as a simple stopwatch.• Press the TIMER button to start timing.• Press the TIMER button again to stop timing.• Read the elapsed time in the display.• Lift the handset and replace it to idle.CALL COSTDisplay keyset users may have the call charge automaticallydisplayed if metering is available.• While on-hook, press TRSF followed by 110.• Dial 71 to turn the call cost on or 70 to turn it off.• Press TRSF to store your selection.VIEWING MESSAGE INDICATIONSYou can view all your message indications before you return them:• While on-hook, press the flashing MSG key.• The first station that left a message indication is displayed.• Press the UP and DOWN arrows to scroll through the stationsthat left message indications. Use the soft keys to reply, clear oradvance to the next message.• Press the ANS/RLS key to return to the idle condition.ALARM REMINDER MESSAGESWhen you use the alarm/appointment reminder feature, you cancreate a 16 character reminder message. When the alarm rings, Themessage will appear when the alarm rings.To program reminder messages:• Press TRSF followed by 116.• Dial the alarm number 1, 2 or 3.• Dial the time you want the alarm to go off. Enter the time asHHMM (hours & minutes) using the 24 hour clock.• Dial 0 (NOT SET), 1 (TODAY) or 2 (DAILY) to select alarm type.• Write your message using the dial pad keys. Each press of a