English - 10Entering the menu1 Press the ▲, ▼, ◄ or ► button on your remote control.➢ The Wall Mount Adjustment screen is displayed.➢ If the Wall Mount Adjustment screen is not displayed when clicking on adirection button while watching your TV, use the menu to display that screen.• Press the MENU button to display the menu. Press the ▲ or ▼ button to selectSetup, then press the ENTER button.• Press the ▲ or ▼ button to select External Settings, then press the ENTERbutton.• Press the ▲ or ▼ button to select Wall-Mount Adjustment, then press theENTER button.Remembering the Position Adjust to the desired position using the ▲, ▼, ◄, ► buttons.➢ If you press an arrow button when no OSD is displayed on the TV screen, theAdjustment screen appears.➢ Press the INFO button to reset. Press the ◄ or ► button to select Yes, thenpress the ENTER button. The position is initialized to the default setting. Press the Blue button.Press the ▲ and ▼ buttons to select a save mode from either Position1,Position or Position in order to save the current position.➢ To not save the current position, press the RETURN button.➢ When selecting a save mode, you cannot use the Color buttons.4 Press the ENTER button to save.➢ When Position1 is selected, the message Current position saved asPosition1 is displayed.5 Press the ENTER button.➢ The saved Position appears on the left side of the OSD.Moving to the remembered position1 Complete Step 1 of Entering the menu. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to thesaved position.➢ You can move the wall mount to one of the 3 pre-set positions by pressing theRed (Position 1), Green (Position 2) or Yellow (Position 3) buttons.➢ If you adjust the positon after moving to a pre-set position, the position displaywill disappear.➢ For installation, refer to the Installation Manual provided with the wall mount.➢ For product installation and the installation and moving of the wall mount, make sure to consult a specializedinstallation company.➢ This installation manual is to be used when attaching the wall mount to a wall. When attaching to other buildingmaterials, please contact your nearest dealer.➢ The auto wall mount will not work when Anynet+ or WISELINK is operating.Auto Wall-mount adjustment (Sold separately) (PN50A0T1F)Once the auto wall mount is installed, the position of your TV can be easily adjusted.TV Rear Panel Auto Wall-MountEX-LINK Cable (Not supplied)External SettingsMelody : MediumLight Effect : Watching TVWall-Mount Adjustment ►ReturnEnterMoveWall-Mount AdjustmentPosition1AdjustPosition 1 2 3CenterSaveAdjustPosition 1 2 3CenterSaveWall-Mount AdjustmentSaveMove EnterSelect a mode to Save.Position1Position2Position3Return
