QWERTY Side View✎ NOTE The remote side doesn’t work when the QWERTY side is up, and vice versa.Inserting Batteries Slide out the battery cover. Push the button right. Pull the battery tray out. Insert 4 AAA batteries in the tray, insert the battery trayinto the QWERTY Remote and put the cover back on.Initial Pairing1. When the user inserts batteries into the QWERTY Remote, "NEED PAIRING PRESS SYM+TAB” will be displayed on thescreen.2. Press SYM and TAB buttons at the same time more than 2 seconds.✎ A TV can be paired with only one QWERTY Remote.When turn on the TV, start the pairing process about 30 seconds later.To perform the pairing process again1. Press MUTE, 0, MUTE and 0 on the remote side of new QWERTY Remote facing the TV.2. Follow the initial pairing process in 3 minutes.✎ If new QWERTY Remote doesn't paired with the TV in 3 minutes, perform the process again.BA CESC CAPS SHIFT SHIFTSYM SYM.COM@21 354 6807 9#!$@^%& (*)_ +~`<[ ];//> ,}{ |‘: “?.WQ ESA DZTAP ENTERXTR YGF HVC BIU OKJ LPMNDmEConvenient QWERTY keyboard to type characters in SMART HUB andSOCIAL TV menu, etc.SYM: Enables the symbol printed on the lower right side of each button.OFN(Optical FingerNavigation) SensorIn full browser function,it can be used as thepointer. If the userdoesn’t press any buttonduring 30 seconds,the sensor will be offautomatically.To wake up the sensor,press any button on theQWERTY side.Displays the characters the user typed in.When the user presses ENTER, all characterson the screen are removed.