Auto Wall-Mount Adjustment (Sold separately)Once the auto wall mount is installed, your TV's position can be easily adjusted.Auto Wall-MountTV Rear PanelEX-LINK Cable(Not supplied)V-Chip" Captionen@,~ External Settings-> Entertainment : OffEnergy Saving : Off'7Software UpgradeRemembering the Position2. Adjust to the desired position using the .. , ~ , ~ buttons.~ If you press an arrow button when no OSO is displayed on the TV screen,the Adjustment screen appears.> Press the INFO button to reset. Press the or ~ button to select "Yes",then press the ENTER G' button. The position is initialized to the defaultsetting.3. Press the Blue button.Press the .. and ~ buttons to select a save mode from either Position 1,Position 2 or Position 3 in order to save the current position.> To not save the current position, press the RETURN button.> When selecting a save mode, you cannot use the Color buttons.4. Press the ENTER G' button to save.> When Position1 is selected, the message "Current position saved asPosition1" is displayed.5. Press the ENTER G' button.> The saved Position appears on the left side of the OSO.Moving to the remembered position1. Complete Step 1 of "Entering the menu".2. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount tothe saved position.> You can move the wall mount to one of the 3 pre-set positions by pressingthe Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.> If you adjust the position after moving to a pre-set position, the position display will disappear.Entering the menu1. Press the .. , ~, or ~ button on your remote control.> The Wall Mount Adjustment screen is displayed.> If the Wall Mount Adjustment screen is not displayed when clicking ona direction button while watching your TV, use the menu to display thatscreen.• Press the MENU button to display the menu. Press the .. or ~ button to select"Setup", then press the ENTER G' button.• Press the .. or ~ button to select "External Settings", then press the ENTER G'button.• Press the .. or ~ button to select "Wall-Mount Adjustment", then press theENTER G' button.>- For installation, refer to the Installation Manual provided with the wall mount.>- For product installation and the installation and moving of the wall mount, make sure to consult a specializedinstallation company.:;". This installation manual is to be used when attaching the wall mount to a wall. When attaching to other buildingmaterials, please contact your nearest dealer.:;". The auto wall mount will not work when Anynet+ or WISELINK Pro is operating.> LN46A850S 1F and LN46A860S2F models are not compatible with the old electrically powered wall mount model(WMN5090A).
