English - 66LAN Connection for Static IP EnvironmentThe procedures to set up the network using a static IP address are described below. You have to manually enter the IP address,subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable.The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.NIf you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS.NYou must enter these values to complete the network settings. If you do not know the values, ask your network administrator.For the information on how to conigure and connect a Sharer (Router), refer to the owner’s manual for the corresponding product.NYou can connect the TV to the LAN directly without connecting it through a Sharer (Router).NIf you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.NFor the procedures to use a static IP address, ask your Internet Service Provider.NContinued...TV Rear PanelLAN Cable1The LAN Porton the WallTV Rear PanelLAN CableIP SharerLAN CableThe LAN Porton the WallYou can connect the LAN via a Sharer (Router).BN68-850_Eng.indb 66 2009-06-18 3:56:03
