Samsung 8500 User Manual

Also see for PDP 8500 series: E-manual E-manual User guide E-manual User manual

BN68-05038A-02QUICK STARTGUIDEWelcome to your new Smart TV!The following instructions cover assembling, connecting, and setting up your new TV. Makesure you have the accessories listed below.Included in this boxRemote Control Stand Parts and CablesSmart Touch Control Cable clip Power cord IR extenderBatteries (AAA x 2) RCA Adapter Component adapter Blanking BracketAlso included: User Manual, regulatory guide, 3D Active Glasses,Cleaning ClothStep 1Attach the TV tothe StandStep 2Connect videodevicesStep 3Insert thebatteries into theremote controlStep 4Power on andstart the initialsetupWarning: Screens can be damagedfrom direct pressure when handledincorrectly. We recommend lifting theTV by the edges, as shown.Step 1 Attach the TV to the Stand1 Lay the TV on a soft surface, screen side down.Use the packing material to protect the screen.5 Remove the protection film from the bottom of theTV and stand, as shown by the illustration.REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV(such as the box). 6 Holding the stand parallel to the screen, slide thestand into the notches on the back of the TV.Fit the guide protrusion on each edge of the standin the matching hole on the sole of the TV.2Basex 2Leg Screwsx 12Put a base, legs and screws off to assemble thestand out of the box.3LR Fit the stand and mount together, making surethe notch on the mount aligns with the stand.7 x4 (M4 X L12)Insert 2 screws and secure the stand to the TV.4 x8 (M4 X L12)Insert 4 screws and secure the stand to the TV.Warning: Handling the TV incorrectlycan result in injury. After setting thestand into the TV, we recommend notlifting the TV using the stand. Lift itby grabbing the front and bottom, asshown.