Samsung 8500 User Manual

Also see for PDP 8500 series: E-manual E-manual User guide E-manual User manual

English - 6Connecting to the TVIn order to operate the TV using a Smart Touch Control, you must fi rst pair it to the TV via Bluetooth.However, the Smart Touch Control is only available for the paired Samsung TV.1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press theP button. The remote control receiver's location may vary depending on the model.2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attemptto connect to the Smart Touch Control automatically.Inserting the Batteries (AAA X 2)1. Slightly lift the battery cover by pulling the strap or using a plastic card. Next, pull on the cover’s notchwith a fi ngernail to remove the cover completely.2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.3. Align the battery cover with the back of the remote control, and then press down along the edges untilit is completely attached to the remote control.