Samsung 8+ series User Manual

Also see for 8+ series: User instructions User manual User manual User manual User manual

English - 28Configuring a Wireless Network ConnectionThe instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) toconfigure network connections automatically. Most wireless networks use DHCP. If you have a Static IPnetwork, see your user’s manual for configuration instructions.To configure the network connection for a network that uses DHCP, follow these steps:1. Connect your TV to your network as shown in the illustration.2. Turn on your TV, go to the Network Settings screen. (Menu → Network → Network Settings)3. Select Start. The Network function searches for available wireless networks. When done, it displays alist of the available networks.4. In the list of networks, move the Highlight to select a network, select Next.✎ If you have a WPS(PBC) compatible router, select WPS(PBC) instead, and then follow thedirections on the screen.5. Enter your network security key or WPS PIN using your remote.✎ Enter numbers and letters using your remote.• If you are using the standard remote, you can enter numbers by pressing the number buttons onthe remote.• To enter a letter, move the Highlight to the letter, and then select it. You can enter numbers in thesame fashion if you choose.✎ To display capital letters (or redisplay small letters if capital letters are displayed), select Caps orShift.✎ To display symbols and punctuation, select F. To redisplay letters, select F again.6. When done, select Next if you have entered a Security Key or WPS PIN if you have entered a WPSPIN.7. The TV checks the wireless connection. If the connection is successful, the “You are connected to theInternet. If you have any problems using online services, please contact your Internet serviceprovider.” message appears. Select Next using your remote.✎ For more detailed information, see “Setting up the Wireless Network” in the e-Manual.✎ If you want to configure the connection manually, select IP Settings on the Network Connectionscreen. Set IP Mode to Manual, and then enter the IP Address, Subnet Mask, Gateway, andDNS Server manually.Network Connection - WiredThere are three main ways to connect your TV to your network using cable, depending on your networksetup. They are illustrate:The Modem Port on the Wall TV Rear PanelLAN Cable (Not Supplied)Modem Cable (Not Supplied)External Modem(ADSL / VDSL / Cable TV)