Samsung 8+ series User Manual

Also see for 8+ series: User instructions User manual User manual User manual User manual

English - 31Installing batteries (Battery size : AA)1. Press the back of the remote at the very bottom with both thumbs, and then slide the battery cover upin the direction of the arrow.2. Install two batteries so that the polarity of the batteries (+/-) matches the illustration in the batterycompartment.3. Slide the cover down in the direction of the arrow to close the battery cover.Initial Pairing for Smart Touch ControlAfter you run the Initial Setup, you should connect your Smart Touch Control to your TV.1. Point the Smart Touch remote control toward the IR sensor of the TV and press any key on the SmartTouch remote control.2. The connection icon appears at the bottom left of the screen and the Smart Touch remote control isautomatically connected to the TV.✎ If you want to perform the pairing process again, use a pin or the tip of an unbent paper clip to pressthe tiny reset button in the centre of the back cover. The Smart Touch Control will be initialized.• Smart Touch Control PAIRING Reset button.Calibrating the Touch PadTo calibrate the touch pad on the Smart Touch Control, follow these steps:1. Press the NUMBERš button for 3 seconds. The calibration starts.2. When done, all the LEDs on the top of the Smart Touch Control blink twice simultaneously.✎ While calibrating, don't touch the touch pad.✎ If the touch pad looses accuracy, re-calibrate the touch pad by repeating Steps 1 and 2.