Samsung 9000 series User Manual

Also see for 9000 Series: User manual User manual Quick guide User manual Quick setup guide

Contents

English - 188 Clock: Set theClock.Select Auto or Manual, and then select Next.✎ If you selected No, I don’t need to. in 5 - Auto Program (1), you canonly set the current time and date manually, using your remote.AutoIf you selected Auto, the TV will automatically download the correct timefrom a digital channel. The Time Zone screen will appear. Select yourTime Zone, and then select Next. The DST (Daylight Savings Time)screen will appear. The DST function sets the time ahead one hour toadjust the clock for Daylight Savings Time. Select On if you want to turnthe DST adjustment on. Select Off to turn off the DST adjustment. Youcan also turn the DST function on through the TV's on screen menu(Menu ĺ System ĺ Time ĺ Clock ĺ DST).ManualIf you selected Manual, you’ll go to the Clock screen. Select Date orTime. You can set the current date and time using your remote. Whendone setting the Date and Time, select Next.9 Voice and MotionControl: Setting theVoice and MotionControl function.You can turn the Voice and Motion Control function on or off. Select Offor On, and then select Next.10 Setup: Complete Review the Setup data, and then select Close to finish.✎ The completed settings are displayed.11 Set the UniversalRemote.1. Turn on the POWER button on the bottom of the IR Blaster, and thenpress the PAIRING button.2. Select Yes to start the Universal Remote Setup.✎ For more detailed information about the Universal Remote Setup,refer to "Setting up the Universal Remote Control" section in themanual (page 44).If You Want to Rerun Setup...Menu ĺ System ĺ SetupIf You Want to Turn the Store Demo Mode On or Off.To set or unset Store Demo mode outside of Setup, press and release the Controller when the power ison. The Function menu screen appears. Push the Controller to the left (to MENU (m)) and hold for morethan 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu usingthe Controller, push the Controller to the right (to Source (s)) and hold for more than 5 seconds. Seepage 10 for information about the Controller.