Samsung AM160FNBDEH Installation Manual

Also see for AM040FXMDEH: Service manual

54Setting an indoor unit address and installation optionSetting an indoor unit installation option (suitable for the condition of each installation location)1. Check whether power is supplied or not.- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.2. The panel(display) should be connected to an indoor unit to receive option.3. Set the installation option according to the installation condition of an air conditioner.- The default setting of an indoor unit installation option is “020000-100000-200010-300000- Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when there ismore than one indoor unit.4. Set the indoor unit option by wireless remote controller.■ 02 series installation optionSEG1 SEG2 SEG3 SEG4 SEG5 SEG60 2 - - Central control -SEG7 SEG8 SEG9 SEG10 SEG11 SEG121 - - -Opening theelectronicexpansion valve-SEG13 SEG14 SEG15 SEG16 SEG17 SEG182 External control External controloutput - - -SEG19 SEG20 SEG21 SEG22 SEG23 SEG243 - Heating settingcompensationEEV opening ofan indoor unitstopped during oilreturn or Defrostoperation.- -f If you input a number other than 0~4 of the individual control of the indoor unit(SEG20), the indoor is set as “indoor 1”.f SEG5 option for centralized control usage is set to 0(disuse) as a default setting. You must adjust the setting for this optionseparately when centralized control needs to be used.■ 02 series installation option(Detailed)Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXXOption SEG1 SEG2 SEG3 SEG4 SEG5 SEG6Explanation PAGE MODE Use of robot cleaning Use of externaltemperature sensorUse of centralcontrolFAN RPMcompensationRemoteControllerDisplayIndicationand DetailsIndication Details Indication Details Indication Details Indication Details Indication Details Indication Details0 2 0 Disuse 0 Disuse 0 Disuse 0 Disuse1 Usek}tGokyvGo{ptXYWZ`]]hTXluUGGG\[ YWXZTW_TW]GGG㝘㤸G`a[[a[_