Samsung AM160FNBDEH Installation Manual

Also see for AM040FXMDEH: Service manual

5ENGLISHPreparing the installationTools required for installationGeneral toolsVacuum pump Torque wrench Pipe cutter Reamer Pipe benderSpirit level Screw driver Spanner Drill L wrenchMeasuring tapeTools for operationThermometer Resistance meter ElectroscopeAccessories (supplied)Before the installation, make sure to check if following accessories are included inside the DVM Hydro unit / Hydro unit HT.Installation manual Drain plug Drain capAdditional accessory (not included)Additional accessory needs to be purchased separately and installed to operate DVM Hydro unit / Hydro unit HT.(Model name of the wire remote controller : MWR-WW00N)Wired remote controllerf Recommended specification of the strainerModel type Model name Work pressure WorktemperatureWater pipeconnection part Mesh size Material(Strainer/Mesh)HEADN160BDE✴✴1.0 MPa -5~48 °CPT 1(25A)50 Mesh AISI316/SUS304ADN320BDE✴✴AM160FNBD✴✴AM320FNBD✴✴ADN500BDE✴✴ PT 1-1/4(32A)AM500FNBD✴✴HT AM✴✴✴FNBF✴✴ -20 ~ 35 °C PT 1(25A)k}tGokyvGo{ptXYWZ`]]hTXluUGGG\ YWXZTW_TW]GGG㝘㤸G`a[[aYZ