Samsung AQ09UGFN User & Installation Manual

Also see for AQ09T Series: User & installation manual User & installation manual

ENGLISH27• Make sure to drill only onehole after choosing thedirection of the pipe.Fixing the installation plateThe following connection accessories are optional. If they are not supplied, you should obtain them before installing the airconditioner.Optional accessoriesTools required for installationInsulatedAssembly Pipe,Ø6.35mm (1)Insulated AssemblyPipe, Ø9.52mm (1)09Insulated Assembly Pipe,Ø12.70mm (1)12/18Insulated Assembly Pipe,Ø15.88mm (1)24PE T3 Foam TubeInsulation (1) Vinyl Tapes (2) Drain Plug (1)Rubber Legs (4) Pipe Clamps A (3) Pipe Clamps B (3) Cement Nails (6) M4 x 25 TappedScrews (6)Drain Hose,length 2m (1) Putty 100g (1)• If these accessories are supplied, they will be in the accessory box.General Tools• Vacuum Pump(Backward flowing prevention) • Manifold Gauge • Stud Finder• Torque Wrench • Pipe Cutter • Reamer • Pipe Bender • Spirit Level• Screw Driver • Spanner • Drill • L Wrench • Measuring TapeTools for test operations• Thermometer • Resistance Meter • ElectroscopeYou can select the direction of the drain hose depending on where you want to install the indoor unit. Therefore before fixingthe installation plate to a wall or a window frame, you must determine the position of the 65mm hole through which the cable,pipe and hose pass to connect the indoor unit to the outdoor unit.When facing the wall, the pipe and cable can be connected from the:• Right (A)• Left (B)• Underside_right (C)• Rear_right or left (D) BADCD Direction of pipe1. Determine the position of the pipe and drain hose hole as seen in the picture and drill the hole with an inner diameterof 65mm so that it slants slightly downwards.BADCPipe hole(Ø65mm)(Unit : mm)Model A B C D09/12 27 120 68 2718/24 34 140 68 34Boracay EUR_AQ09T&U@_IBIM_32447A_E.indd 27 2011-3-19 10:08:09