Samsung AQV09J Series Installation Manual

Also see for AQV09J Series: User manual

Contents

E-15ENGLISHCOMPLETING THE I NSTALLATIONFixing the Indoor Unit in PlaceAfter checking for gas leaks in the system, insulate the pipe, hose and cables.Then place the indoor unit on the installation plate.1 To avoid condensation problems, place heat-resistant polyethylene foamseparately around each refrigerant pipe in the lower part of the indoor unit.2 Wrap the refrigerant pipe and the drain hose in the rear of the indoor unit withthe absorbent pad. Wind the pipe and hose three times to the end of the indoor unit with theabsorbent pad. (0.79 inch(20mm) interval)3 Wind the pipe, assembly cable and drain hose with insulation tape.4 Place the bundle (the pipe, assembly cable and drain hose) in the lower part ofthe indoor unit carefully so it doesn’t project from the rear of the indoor unit.5 Hook the indoor unit to the installation plate and move the unit to the rightand left until it is securely in place.6 Wrap the rest of the pipe with vinyl tape.7 Attach the pipe to the wall using clamps (optional).Installation plate

/ 18

Related manuals for Samsung AQV09J Series