10EnglishInstallationIf using a multi system, refer to the manualsupplied with the outdoor unit.Optional accessoriesInsulated assembly pipe,Ø 6.35 mm (1)Insulated assembly pipe,Ø 9.52 mm (1)**09*********12*******Pipe clamp B (3) Pipe clamp A (3)Drain Hose, 2 m long (1) Foam Insulation (1)Vinyl tape (2) PE T3 foam tube insulation (1)Putty 100 g (1) Drain plug (1)M4 x 25 tapped screw (6) Cement nail (6)3-wire Power Cable (1) 3-wire Assembly Cable (1)2-wire Assembly Cable (1)Accessories in the outdoor unit packageRubber leg (4)NOTE• A flare nut is attached to the end of each pipeof an evaporator or a service port. Use flare nutswhen connecting the pipes.• Wire assembly cables are optional. If they are notsupplied, use standard cables.• The drain plug and the rubber legs are includedonly when the air conditioner is supplied withoutassembly pipes.• If these accessories are supplied, they are in theaccessory package or outdoor unit package.ToolsGeneral tools• Vacuum pump(Backward flowing prevention)• Manifold gauge• Stud finder• Torque wrench• Pipe cutter• Reamer• Pipe bender• Spirit level• Screwdriver• Spanner• Drill• L-wrench• Measuring tapeTools for test operation• Thermometer• Resistance meter• Electroscope