Samsung AS12A1VC Owner's Instructions & Installation Manual

Contents

You must select the Cool mode if you wish to adjust the: Cooling temperature Fan speed when cooling1 If necessary, press the (On/Off) button.Result: The OPERATION indicator on the indoor unit comes on. The air conditioner starts up in the mode selected whenthe unit was last used. The indoor unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being: Plugged in StoppedIt will start up normally after a three-minute.2 If the indication is not displayed at the top of the remote control,press the button on the remote control one or more times until itappears.Result: The indoor unit beeps each time you press . The air conditioner starts up in Cool mode.NNNN oooo tttt eeee You can change modes at any time.3 To adjust the temperature, press the or buttons one or moretimes until the required temperature is displayed.Possible temperatures are between 18°C (65°F) and 30°C (86°F) inclusive.Result: Each time you press or :- The temperature is adjusted by 1°C (1°F)- The indoor unit beeps The air conditioner starts cooling, provided that the roomtemperature is higher than the selected temperature;the fan will, however, operate.4 Select the fan speed by pressing the button one or more timesuntil the required setting is displayed:LowMediumHighAutomaticResult: Each time you press , the indoor unit beeps.5 To control the direction of the air flow, refer to page 14.Cooling Your RoomM O D E T U R B OO F FM O D ET U R B OO F FIMPORTANTIMMODEMODEM O D ET U R B OO F FE-10