Samsung AS12A1VC Owner's Instructions & Installation Manual

Contents

Setting the TimeYour air conditioner contains a clock used to start and stop the unitautomatically at a given time.You must set the time when you: Purchase the air conditioner Replace the batteriesNNNN oooo tttt eeee Be sure to reset the time when you change clocks fromstandard todaylight savings time and vice versa.Setting the Time for the First Time1 Insert the batteries. Push the battery cover on the rear of the remote control with yourthumb and remove it.Result: The clock starts.2 Using a small pointed tool (ball-point pen for example), press the button.Result: The AM indication flashes.3 To set the current time, press the or buttons under the cover onthe remote control.To... Then...Increase the time in one-minute intervals Press the ()button.Increase the time in ten-minute intervals Hold down the ()button.Decrease the time in one-minute intervals Press the ()button.Decrease the time in ten-minute intervals Hold down the ()button.Result: AM or PM is displayed to indicate whether the settingcorresponds to a time before or after midday.4 When you are satisfied with your setting, confirm the time. To do so:using a small pointed tool (ball-point pen for example), press the button.Result: The AM or PM indication stops flashing. The clock starts.Resetting the TimeIf you have already set the time but wish to change it,proceed as follow.1 Using a small pointed tool (ball-point pen for example), press the buttonunder the remote control flap.Result: The AM or PM indication flashes.2 Set the time, following the instructions in Step 3 in the procedure above.3 When you are satisfied with your setting, confirm the time. To do so,press the button, using a small pointed tool (ball-point pen forexample).Result: The AM or PM indication stops flashing. The clock starts.E-8