English - ➢ Optimum condition for pixel shift;PC TV/Ext/AV/Component/HDMI/DTVHorizontal Dot 1 2Vertical Line 1 2Time (minute) 2 2 min➢ The Pixel Shift value may differ depending on the monitorsize (inches) and mode.− White: This function helps remove after images on the screen by changing the colour of pixels towhite. Use this function when there are remaining after images or symbols on the screen especiallywhen you displayed a still image on the screen for a long time.− Scrolling: This function helps remove after images on the screen by moving all the pixels on thePDP according to a pattern. Use this function when there are remaining after images or symbols onthe screen especially when you displayed a still image on the screen for a long time.− Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from anydamage by adjusting the white balance on both extreme left and right sides.Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.Light: When you set the screen ratio to 4:3, it brightens the left and right sides.➢ To remove after images on the screen, use either White or Scrolling function. Although both ofthe two functions remove after images on the screen, Scrolling is more effective.➢ The after image removal function has to be executed for a long time (approximately 1 hour) toeffectively remove after images on the screen. If after image is not improved after the executionof the function, repeat the function again.➢ Press any button on the remote control to cancel this feature.Resetting the Picture Settings to the Factory DefaultsYou can set detailed picture settings.1 Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Reset, then press theENTER button.4 Press the ▲ or ▼ button to select OK or Cancel then pressthe ENTER button.➢ Each mode can be reset.Move Enter ReturnPixel Shift : On Horizontal Dot : Vertical Line : Time : min Pixel ShiftT VMove Enter ReturnMode : StandardCell Light Contrast 0Brightness 45Sharpness 50Colour 50Tint G50 R50Detailed SettingsPicture OptionsReset : OKPictureT VOKCancel
