English - 41− Software Upgrade (Option)To keep your product up-to-date with new digital televisionfeatures then software upgrades are periodically broadcastas part of the normal television signal. It will automaticallydetect these signals and display the software upgradebanner. You are given the option to install the upgrade. Software InforamtionPress the ENTER button, then the current softwareversion is shown. To display the software versioninformation, press the ENTER button again. Manual UpgradePress the ENTER button to search for new software from the currently broadcasting channels. Standby Mode Upgrade : On / OffPress the ENTER button. To continue software upgrade with master power on, Select On bypressing the ▲ or ▼ button.45 minutes after entering standby mode, a manual upgrade is automatically conducted. Sincethe power of the unit is turned on internally, the screen may be on slightly for the PDP product.This phenomenon may continue for more than 1 hour until the software upgrade is completed.− ResetYou can reset the values stored to the factory default values.➢ The Reset operation deletes all channel informationand user preferences returning all values to their defaultfactory state. Press the ENTER button with Reset selected.The Enter PIN is displayed. Enter your current 4-digit PIN code by using thenumeric buttons (0~9). The warning message isdisplayed. All values will be reset by pressing thecoloured buttons (red, green, yellow, and blue) in turn.➢ The default PIN of a new TV set is “0-0-0-0”.➢ When PIN is changed in Child Lock, the PIN forresetting automatically changes. When reset is complete, it operates DTV Plug & Play(DTV Auto Store, Time Zone-depending on the country,Time Setting) and exits from the digital TV mode without changing to the analog TV mode.(Refer to page 10)WARNING: All channel settings and user preferences will belost and returned to the factory defaults. It is recommendedthat a reset is performed only when serious problems areexperienced.ResetReturnDTVSoftware Information Manual Upgrade Standby Mode Upgrade : On Software UpgradeMove Enter ReturnDTV
