Samsung BN68-01464D-00 User Manual

Also see for LE32A436T1D: Manual

Contents

English - 0Upgrading the SoftwareTo keep your product up-to-date with new Digital Televisionfeatures then software upgrades are periodically broadcast aspart of the normal Television signal.It will automatically detect these signals and display thesoftware upgrade banner. You are given the option to install theupgrade.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select "Digital Menu", then press theENTER button.. Press the ▲ or ▼ button to select "Setup", then press theENTER button.. Press the ▲ or ▼ button to select "System", then press theENTER button.. Press the ▲ or ▼ button to select "Software Upgrade",then press the ENTER button.. Press the ▲ or ▼ button to select “Software Information”,“Manual Upgrade” or “Standby Mode upgrade”.Press the ENTER button.♦ Software InformationPress the ENTER button, then the current software version is shown. To display the softwareversion information, press the ENTER button again.To switch to an alternative version, press the red button.Press the blue button to reset, activate the upgrade and restart.♦ Manual UpgradePress the ENTER button to search for new software from the currently broadcasting channels.♦ Standby Mode Upgrade: On / OffPress the ENTER button. To continue software upgrade with master power on, Select Onby pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade isautomatically conducted. Since the power of the unit is turned on internally, the screen may be onslightly for the LCD product. This phenomenon may continue for more than 1 hour until the softwareupgrade is completed.. Press the EXIT button to exit.Checking the Signal InformationYou can get information about the signal status.1. Press the MENU button to display the menu.Press the ▲ or ▼ button to select "Digital Menu", then press theENTER button.. Press the ▲ or ▼ button to select "Setup", then press theENTER button.. Press the ▲ or ▼ button to select "System", then press theENTER button.. Press the ▲ or ▼ button to select "Signal Information", then press the ENTER button.. Press the EXIT button to exit.If the signal status is poor, the "No signal." message is displayed.➣Move Enter ReturnSignal InformationService: ?Service ID:0000Multiplex: ? (TSID 0000, ONID 0000)Network: ? (ID 0000)bit error level: 10Signal Strength: 0ReturnDTVSystemProduct Information Signal Information Software Upgrade Reset Move Enter ReturnDTVSoftware UpgradeSoftware Information Manual Upgrade Standby Mode upgrade : On Move Enter ReturnDTV