Samsung BN68-01464D-00 User Manual

Also see for LE32A436T1D: Manual

Contents

English - 0RecordingYou can make a recording of a TV programme using a recorder.Press the button.Recording begins. (Only when the Anynet+ enabled recording device is connected.)The current TV programme is recorded in the Watching TV status. If you are watching video fromanother device, the video from the device is recorded.You can also record the source streams by selecting "Record" after pressing the TOOLS button.Before recording, check whether the antenna jack is properly connected to the recording device. Forthe antenna connection to the recording device, refer to its user manual.➣➣➣Listening through a ReceiverYou can listen to sound through a receiver instead of the TV speaker.1. Press The TOOLS button. Then Press the ENTER buttonto select "Anynet+(HDMI-CEC)".Press the ▲ or ▼ button to select "Receiver", then press theENTER button.. Press the ◄ or ► button to select to "On", then press theENTER button.Now you can listen to sound through the receiver.. Press the EXIT button to exit.When the receiver is set to On, you can listen to the TV soundthrough the 2-channel receiver.If the receiver is exclusively for a home theatre only(supporting audio only), it may not appear in the device list.Only when you have connected the optical jack of the TV and the receiver properly, does Receiverwork.In case of a content with copyright problem, listening through the receiver may not properly operate.If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting thepower cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again.(see page 22)➣➣➣➣➣View TVSelect Device Record Menu on Device Device Operation Receiver :Off Setup TV P9Move EnterReturn