Samsung CB15K10 Owner's Instructions Manual

Also see for CB15K10: Owner's instructions

Contents

English - 2The mains lead is attached to the rear of the television.1 Plug the mains lead into an appropriate socket.➢ The main voltage is indicated on the rear of thetelevision and the frequency is 50 or 60Hz.2 Press the button (On/Off) on the front (or side) of thetelevision.3 Press the POWER button on the remote control toswitch the television on. The programme that you werewatching last is re-selected automatically. If you havenot yet stored any channels, no clear picture appears.Refer to “Channel - Auto Store” on page 3 or “Channel -Manual Store” on page 4.➢ If the television is initially powered on, several basiccustomer settings proceed automatically. Refer to“Setup - Plug & Play” on page 3.4 To switch the television off, press the button (On/Off)on the front (or side) of the television.Switching the Television On and OffThe television can be placed in standby mode, in order toreduce power consumption and wear of the cathode raytube. Standby mode can be useful when you wish tointerrupt viewing temporarily (during a meal, for example).1 Press the POWER button on the remote control whileviewing.The television is in standby mode.2 To switch the television back on, simply press it again.☛ Do not leave the television in standby mode for longperiods of time (when you are away on holiday, forexample). Turn the television off by pressing thebutton (On/Off) on the front (or side) of the television. Itis best to unplug the set from the mains and aerial.Placing the Television in Standby Mode44 MUTEUsed to switch thesound off temporarily. Toturn the sound back on,press the MUTE, , orbutton.55 /Used to increase ordecrease the volume.66 TVUsed to return to the TVmode when it is inexternal input mode.77 MENUUsed to display the on-screen menu or return tothe previous menu.88 …… / †† / œœ / √√Used to control thecursor in the menu.99 DUAL I-II (option)Used to select thesound mode.00 TURBO (option)Used to select the turbosound option.!! S.MENUUsed to display thesound menu.@@ PRE-CHUsed to switchrepeatedly between thelast two channelsdisplayed.## VIDEOUsed to display all of theavailable video sources.$$ P /Used to display the nextor previous storedchannel.%% INFOUsed to view thechannel information andsetting status youselected.^^ EXITUsed to exit from anydisplay or return tonormal viewing.&& ENTERWhile using the on-screen menus, press theENTER button toactivate (or change) aparticular item.** P.SIZEUsed to change thescreen size.(( SLEEPUsed to select a presettime interval forautomatic shut off.)) P.MODEUsed to select thepicture effect.aa S.MODE (option)Used to select thesound effect.11 POWERUsed to switch the TVon and off.22 Numeric buttonsUsed to select channelsdirectly.33 -/--Used to select a channelnumbered ten or over.Press this button, then“--” symbol is displayed.Enter the two-digitchannel number.➢ Operation of remote control may be affected by brightartificial light near to the TV.Remote Control (depending on the model)Installing BatteriesRemove the cover. Install two AAAsize batteries, then replace the cover.When the remote control does notoperate normally, check that the “+” and “-” ends of thebatteries are inserted correctly or the batteries are drained.➢ Do not mix battery types, i.e. alkaline and manganese.AA68-03721A-04Eng_indonesia 5/3/06 10:00 AM Page 2