Samsung CK3366ZR4X/BWT Service Manual

Alignment and Adjustments4-6 Samsung Electronics4-2-4 (C) TTX MICOM (SPM-197EP/EPR/EA) OPTION TABLE (FOR MIDDLE EAST)BYTEBYTE0BYTE1BITD7D6D5D4D3D2D1D0D7D6D5D4D3D2D1D0LOW (0)16:9 not functional during zoom(NORMAL-ZOOM)CH Up/down functional in the A/Vmode (SCART Jack)SOUND-I SYSTEM USEDHIGH (1)16:9 functional during zoom(NORMAL-ZOOM-16:9)CH Up/down not functional in theA/V mode (RCA Jack)SOUND-I SYSTEM NOT USEDTDA8374ANOT USEDNOT USEDNOT USEDTDA8842Existing Sharpness level (whenusing the TDA6108 RGB AMP)No Auto Power OnNTSC : 25KHz (NTSC TABLE)PAL : 50KHz (PAL TABLESharpness level up (when using theTDA6107Q RGB AMP)Auto Power OnNTSC : 25KHz (NTSC TABLE)PAL : 27KHz (PAL TABLEApplication MICOMALL (FIX : LOW)EP is an OPTION during A/V(BASIC : LOW)ALL (FIX : LOW)ALLALLEP VERSION : TDA8374A ONLYALL (FIX : LOW)ALL (BASIC : HIGH)ALL (BASIC : HIGH)ALL (RF VOL. CURVE)BASIC : LOW(AV VOL. CURVE : PAL CURVE)Sound system during the autosearch (All should be set for thesystem which is selected duringthe Factory Reset.)Note : A single sound in the Byte0 is unavailableCOLOR SYSTEMD200D1011 01 1SOUND SYSTEMCK : AUTO (No OSD)CW : -. RF : AUTO→PAL →SECAM→NT4.43-. A/V : AUTO→PAL→SECAM →NT4.43 →NT3.58CB : -RF : PAL ONLY (No OSD)-A/V : AUTO→PAL →NT4.43→NT3.58CS : - RF : AUTO→PAL →SECAM →NT4.43→NT 3.58-A/V : AUTO→PAL →SECAM →NT4.43 →NT3.58(?)→B/G→D/K →(?)→B/G→D/K → I→B/G ONLY ( No OSD)(?)→B/G→D/K → I→NT → M →l OSD Language by MiCOM1. Persian (for Iran) : English/Persian (Iranian)2. Arab (Middle East, Africa) : English/French/Arabianl Function Required : 1. PICTURE OFF (after 15 minutes) during no signal 2. AUDIO MUTE (during no signal)3. No BLUE SCREEN 4. No TIMER (CLOCK ON/OFF)SYSTEMD100D0011 01 1B/GD/KI?(B/G & D/K OR M) /EP VER. : M