Samsung CLX-3170FN User Manual

Also see for CLX-3170FN series: Service manual User guide Service manual User guide Specifications

Contents

46 _Copying5. Press Stop/Clear to return to ready mode.Your original is divided into 9 portions. Each portion isscanned and printed one by one in the following order:Clone copyingYour machine can print multiple image copies from the original document ona single page. The number of images is automatically determined by theoriginal image and paper size.This copy feature is available only when you place originals on the scannerglass.1. Press Copy.2. Press Menu until Copy Feature appears on thebottom line of the display and press OK.3. Press the left/right arrow until Layout appears andpress OK.4. Press the left/right arrow until Clone Copy appearsand press OK.5. Press Stop/Clear to return to ready mode.Erasing background imagesYou can set the machine to print an image without its background. Thiscopy feature removes the background color and can be helpful whencopying an original containing color in the background, such as anewspaper or a catalog.1. Press Copy.2. Press Menu until Copy Feature appears on the bottom line of thedisplay and press OK.3. Press the left/right arrow until Adjust Bkgd. appears and press OK.4. Press the left/right arrow until the binding option you want appears.• Off: Does not use this feature.• Auto: Optimizes the background.• Enhance Lev. 1 ~ 2: The higher the number is, the more vivid thebackground is.• Erase Lev. 1 ~ 4: The higher the number is, the lighter thebackground is.5. Press OK to begin copying.6. Press Stop/Clear to return to ready mode.Gray enhance copyingWhen you copy the original in gray scale, use this feature for the betterquality of copy-output. This feature is only for the copy in gray scale.1. Press Copy.2. Press Menu until Copy Feature appears on the bottom line of thedisplay and press OK.3. Press the left/right arrow until Gray Enhance appears and press OK.4. Press the left/right arrow to select On.5. Press OK to begin copying.6. Press Stop/Clear to return to ready mode.SETTING COPY TIMEOUTYou can set the time the machine waits before it restores the default copysettings, if you do not start copying after changing them on the control panel.1. Press Menu until System Setup appears on the bottom line of thedisplay and press OK.2. Press OK when Machine Setup appears.3. Press the left/right arrow until Timeout appears and press OK.4. Press the left/right arrow until the time setting you want appears.Selecting Off means that the machine does not restore the defaultsettings until you press Black Start or Color Start to begin copying, orStop/Clear to cancel.5. Press OK to save your selection.6. Press Stop/Clear to return to ready mode.You cannot adjust the copy size using the Reduce/Enlarge menuwhile making a clone copy.Downloaded From ManualsPrinter.com Manuals