Samsung CLX-330 Series User Manual

IPv6 configuration1602. Using a Network-Connected MachineDHCPv6 address configurationIf you have a DHCPv6 server on your network, you can set one of the followingoptions for default dynamic host configuration.1 Press the (Menu) button on the control panel.2 Press Network > TCP/IP (IPv6) > DHCPv6 Config.3 Press OK to select the required value you want.• DHCPv6 Addr.: Always use DHCPv6 regardless of router request.• DHCPv6 Off: Never use DHCPv6 regardless of router request.• Router: Use DHCPv6 only when requested by a router.10From the SyncThru™ Web ServiceActivating IPv61 Access a web browser, such as Internet Explorer, from Windows. Enterthe machine IP address (http://xxx.xxx.xxx.xxx) in the address field andpress the Enter key or click Go.2 If it’s your first time logging into SyncThru™ Web Service you need tolog-in as an administrator. Type in the below default ID and password.We recommend you to change the default password for securityreasons.• ID: admin• Password: sec000003 When the SyncThru™ Web Service window opens, move the mousecursor over the Settings of the top menu bar and then click NetworkSettings.4 Click TCP/IPv6 on the left pane of the website.5 Check the IPv6 Protocol check box to activate IPv6.6 Click the Apply button.7 Turn the machine off and turn it on again.