642. Menu Overview and Basic SetupBasic scanningFor special scanning features, refer to the Advanced Guide (see "Scanfeatures" on page 230).17Basic ScanningThis is the normal and usual procedure for scanning originals.This is a basic scanning method for USB-connected machine.• It may be necessary to press OK to navigate to lower-level menus forsome models.• If you want to scan using the network, refer to the Advanced Guide (see"Scanning from network connected machine" on page 231).1 Place a single document face down on the document glass, or load thedocuments face up into the document feeder (see "Loading originals" onpage 50).2 CLX-330xFN Series/CLX-330xFW Series: Select (scan) > Scan to PC >Local PC on the control panel.ORCLX-330x Series/CLX-330xW Series: Press Scan to > Scan to PC > LocalPC on the control panel.If you see Not Available message, check the port connection, or selectEnable Scan from Device Panel in Samsung Easy Printer Manager >Switch to advanced mode > Scan to PC Settings.3 Select the scan destination you want and press OK.Default setting is My Documents.• You can create and save the frequently used settings as a profile list. Alsoyou can add and delete the profile and save each profile to a differentpath.• To change the Samsung Easy Printer Manager > Switch toadvanced mode > Scan to PC Settings.4 Select the option you want and press OK.5 Scanning begins.Scanned image is saved in computer’s C:\Users\users name\MyDocuments. The saved folder may differ, depending on your operatingsystem or the application you are using.
