10ENGPlug & Play FeaturePlug & PlayAnt. Input : CheckSelect ExitSelect Adjust ExitAuto storeArea : ASIA W/EUROPESearch : -/+When the television is initially powered ON, three basic customersettings proceed automatically and subsequently: setting thelanguage, channel and clock.1 If the television is in Standby mode (red light visible on thetelevision front panel), press the POWER button on the remotecontrol.Result: The message “Plug & Play” is displayed. It flickers for alittle while and then the “Language” menu isautomatically displayed.2 Press the ▲ or ▼ button to select required language. Press theMENU button to enter the language, and then the message “Ant.Input : Check” is displayed.➣ If any language is not selected on the “Language” menu, the“Language” menu will be displayed about 30 seconds later.3 Make sure that the antenna is connected to the TV. And then pressthe + or – button.Result: The “Auto store” menu is displayed.4 Select your country by pressing the + or – button. To search thechannels, select the “Search” by pressing the ▲ or ▼ button, andthen press the + or – button (refer to “Storing the ChannelsAutomatically” on page 13). Press the MENU button to skip.Result: The “Time” menu is displayed.5 Press the + or – button to move to the hour or minute. Set the houror minute by pressing the ▲ or ▼ button (refer to “Setting andDisplaying the Current Time” on page 28).6 When you have finished, press the MENU button.Result: The message “ENJOY YOUR WATCHING” is displayed,and then the channel which has been stored will beactivated.7 If you want to reset this feature...1 Press the MENU button.2 Press the ▲ or ▼ button to select the “Function”, and thenpress the + or – button.3 Select the “Plug & Play” by pressing the ▲ or ▼ button, andthen press the + or – button.Result: The message “Plug & Play” is displayed.Select Enter ExitTimeClock : -- : -- amTimer : OffSelect Enter ExitFunctionLanguage : EnglishTimePlug & PlayBlue screen : OffChildlockDemonstrationSelect Enter ExitFunctionLanguage : EnglishTimePlug & PlayBlue screen : OffChildlockDemonstration