37ENGBefore contacting Samsung after-sales service, perform the following simple checks.If you cannot solve the problem using the instructions below, note the model and serial number of thetelevision and contact your local dealer.◆ Check that the mains lead has been connected to a wall socket.◆ Check that you have pressed the POWER (ON/OFF) button.◆ Check the picture contrast and brightness settings.◆ Check the volume.◆ Check the volume.◆ Check whether the MUTE button has been pressed on theremote control.◆ Adjust the colour settings.◆ Check that the broadcast system selected is correct.◆ Try to identify the electrical appliance that is affecting the televisionand move it further away.◆ Plug your television into a different mains socket.◆ Check the direction, location and connections of your aerial.This interference is often due to the use of an indoor aerial.◆ Replace the remote control batteries.◆ Clean the upper edge of the remote control (transmission window).◆ Check the battery terminals.Troubleshooting: Before Contacting Service PersonnelNo sound or pictureNormal picture but no soundNo picture or black and white pictureSound and picture interferenceBlurred or snowy picture,distorted soundRemote control malfunctionsA degaussing coil is mounted around the picture tube, so you do not normally need to degauss thetelevision manually.If you move the television to a different position and color patches appear on the screen, you must:◆ Switch the television off by pressing the “POWER ” (ON/OFF) button on the front panel◆ Unplug the television from the wall socket◆ Leave the television power-off (stand-by) for about 30 minutes so that the automatic degaussfunction can be activated, and then press the POWER button on the remote control.☛ If your television will be left unattended, press the “POWER ” (ON/OFF) button to turn yourtelevision off.Automatic Degaussing to Remove Colour Patches