English - 1Control Panel (depending on the model)➢ The product color and shape may vary depending on themodel. You can use the 3 buttons to switch the TV on when it isin standby mode depending on the model. The 2 and 3 buttons also have the same function as the◄/►/▲/▼ buttons on the remote control. If the remote control no longer works or you havemisplaced it, you can use the controls on the panel of thetelevision.COLOR TELEVISIONAA68-04052F-01Owner’s InstructionsBefore operating, please read this manual thoroughly,and retain it for future reference.Register your product at www.samsung.com/global/register.Record your Model and Serial number.▪ Model __________ ▪ Serial No. __________CS 21Z45/21Z47/21Z43/21Z50/21Z57/21Z55/21Z58/21AF0/21AE0/21AJ0/21AM0/21AD0/21BA0/21BE0/21BF0/21BH0/21BM0/21AB0/21AS0/21C540/14BK0/14C540/Connection Panel (depending on the model)➢ The product color and shape may vary depending on the model.Front (or Side) Panel1 On-screen menu display2 Volume adjustment3 Channel selection4 Remote control sensor5 Standby indicator6 Power on/offcable televisionnetworkor☛ Whenever you connect an audio or video system to yourtelevision, ensure that all elements are switched off.☛ Please be sure to match the color coded input terminals andcable jacks.Connecting to an Aerial or Cable Television NetworkConnect the aerial or network input cable to the 1 (75 Ω coaxialsocket). To view television channels correctly, a signal must bereceived by the set from one of the sources: an outdoor aerial,cable television network, or satellite network. If you are usingan indoor aerial, you may need to adjust it when tuning yourtelevision until you obtain a picture that is both sharp and clear.Connecting to the RCA OutputThe RCA2 connectors are used for equipment, such as arecording VCR or audio system.Connecting to the RCA InputThe RCA34 connectors are used for equipment, such as a VCR,DVD, decoder, satellite receiver, video game device, or videodisc player. (When using the mono equipment, connect to theAUDIO-L of 3 input connector.) The RCA5 connectors are usedfor equipment such as a DVD with component output. (480i/576i)➢ You can press TOOLS button to enter DUAL I-II to chooseMono or Stereo.Connecting to the FM signal InputThe 6 is used for FM listening,Connect to the FM radio antenna.➢ Do not connect RCA Video to FM ANT terminalcable televisionnetworkorcable televisionnetworkorRear Panelcable televisionnetworkorcable televisionnetworkorcontinued...continued...cable televisionnetworkorFM ANT✽ : DVD Input and RCA Output cannot be used atthe same time.FMAA68-04052F_Eng.indd 1 2010-01-28 �� 12:00:1021CC0