Samsung CW-21Z573B Owner's Instructions Manual

English - 35− Common Interface Installing the CI Carda. Purchase the CI CAM module by visiting your nearestdealer or by phone.b. Insert the CI CARD into the CAM in the direction of thearrow until it fits.c. Insert the CAM with the CI CARD installed into thecommon interface slot.➢ Insert the CAM in the direction of the arrow, right upto the end so that it is parallel with the slot.d. Check if you can see a picture on a scrambled signalchannel.➢ You can install the CAM anytime whether the TV isON or OFF. Application Info.This contains information on CAM inserted in the CI slotand displays it.− Press the ENTER button to display the information foryour application. CI MenuThis helps the user select an item from the CAM-supportedmenu.− Press the ENTER button. The options of the selected menu are displayed.Press the ▲ or ▼ button to select the required option, then press the ENTER button.➢ Select the CI Menu based on the PC Card menu.− ResetYou can reset the values stored to the factory default values.➢ The Reset operation deletes all channel informationand user preferences returning all values to their defaultfactory state. Press the ENTER button with Reset selected. The EnterPIN is displayed. Enter your current 4-digit PIN code by using the numericbuttons (0~9). The warning message is displayed. Allvalues will be reset by pressing the coloured buttons (red,green, yellow, and blue) in turn.➢ The default PIN of a new TV set is “0-0-0-0”.➢ When PIN is changed in Child Lock, the PIN forresetting automatically changes. When reset is complete, it operates DTV Plug & Play(DTV Auto Store, Time Zone-depending on the country,Time Setting) and exits from the digital TV mode without changing to the analog TV mode.(Refer to pages 10 to 11)WARNING: All channel settings and userpreferences will be lost and returned to thefactory defaults. It is recommended that areset is performed only when seriousproblems are experienced.ResetReturnType: CAManufacturer: Canal PlusInfo: Top Up TVApplication Info.ReturnCI MenuMove Enter Exit