Samsung D1070 User Manual

Also see for D1070: Quick start manual

Contents

Samsung D1070 User Manual Manual pdf 49 page image

48Display ( )If you enable Quick View before capturing an image, you can viewthe image you just captured on the LCD monitor for the durationset in the [Quick View] setup. Quick view is possible only with stillimages.- Sub menus[Off] : The quick view functioncan’t be activated.[0.5, 1, 3 sec] : The captured image isbriefly displayed duringthe selected time.Quick viewIf you set the [Display SAVE] to On and the camera isn't operatedduring the specified time, the LCD monitor will be turned offautomatically.- Sub menus[Off] : The LCD monitor will not be turned off.[On] : If the camera isn't operatedduring the specified time(about 30 SEC.), the camerapower will be idle (Camera statuslamp:Blinking) automatically.Ä You can’t set the [Display SAVE] menu of Playback Mode.Display SAVEDISPLAYDisplay Bright Language Date&Time OnOffBack SetOKStart Image Quick View Display SAVEDISPLAYDisplay Bright Date&Time Start Image Back SetOKLanguage Display SAVE Quick View 1 secOff3 sec0.5 secThis is used for formatting the memory. If you run [Format] onthe memory, all images, including the protected images, will bedeleted. Be sure to download important images to your PC beforeformatting the memory.- Sub menus[No] : The memory will not be formatted.[Yes] : A window for confirming the se-lection displays. Select the [Yes]menu. A [Processing!] messageappears and the memory will beformatted. If you run FORMAT inPlay mode, a [No Image!] mes-sage will appear.Formatting a memory Be sure to run [Format] on the following types of memory card.- A new memory card, or an unformatted memory card- A memory card that has a file this camera can't recognise orone that has been taken from another camera.- Always format the memory card using this camera. If you inserta memory card that has been formatted using other cameras,memory card readers, or PCs, you will get a [Card Error!]message.SETTINGSImprint Reset File Back SetOKPower Off Video Out NoYesFormatSettings ( ” )