Samsung DCB-9401R Instructions For Use Manual

Also see for DCB-9401R: Instructions for use

Contents

GB-8 D I G I T A L C A B L E R E C E I V E R GB-9DCB-9401R GB10. ALT(YELLOW) This key is for selecting the soundtrack list for the current service.This key functions same as the YELLOW key on the menu.Press it once and sound track appears.Press it twice and video track appears.The sound and video track services are not provided for every channeland depend on the conditions the operator is in.This key is for displaying the help message in the sub-menu.11. AUDIO(BLUE) This key is for changing the Audio to the left, right or both channels,This key functions same as the BLUE key on the menu.12. i (INFORMATION) This key is for displaying the program information box in the screen.(RED) This key functions same as the RED key on the menu.Press it once and you can get simple information on the program.Press it twice and you can get detailed information on the channel intext box.13. MENU This key is for opening up the menu or returning to the previous menu.14. EXIT This key is for exiting a menu or returning to the previous menu or exitingsome banners.15. OK This key is for entering and confirming any data to the receiver in themenu system. This key is for selecting the item. Press while viewingTV and a list of channels is displayed.16. / / / These keys are for moving the highlight bar for selecting options on themenu.These keys are for changing channels ( / ).17. CH /CH These keys are for changing channels.18. VOL+/VOL- These keys are for increasing or decreasing the volume.19. TIMER This key is for reserving events(programs) into timer(s) in EPG.If a event is set in timer, it will be turned on/off automatically based onstart/end time of event. This key activates/deactivates timer(s) in EPGas toggle type. After activating EPG screen by pressing ‘EPG’ key, youcan select the interesting event (program) using the / keys and / keys. Then, press ‘TIMER’ key. If this event is reserved in the timer,® is displayed on the right corner of this event name. ‘EPG’ on ‘eventRepetition’ in ‘Time & Timer Settings’ menu is displayed, too.However, if there is no event on EPG for the channel, this TIMER keycan not be supported.Control Uniten inserting batteries,ke sure that the polarity(+/-) is correct.1. POWERThis is for switching the receiverON/STANDBY mode.2. 0-9 NUMERICAL keysThese keys are to enter numeric valuesand to select the channel directly byentering its number.3. PG+/PG-These keys are for moving up or downpages on the menu and TV/Radio list.4. TV/RADIOThis key is for toggling between the TVchannel and Radio channel.5. MUTEThis key is for toggling betweennormal & muted audio.6. FAVUse the key to switch between favorite lists.7. EPG(Electronic Program Guide)EPG key displays the TV/Radio Programguide.8. LASTThis key is for calling up directly whateverchannel you were watching from the list.9. TEXT(GREEN)This key is for selecting the subtitle andTeletext mode. This key functions same asthe GREEN key on the menu. Press it onceand Teletext OSD banner appears.You can select the language you want usingup/down keys. Teletext will be displayed onTV Screen without operating anything on TV.This Teletext can be displayed on TV whichdoesn’t support Teletext functionality.Press it twice. Then Teletext will be availableon TV. It means that Teletext can be chosenby TV with TV RCU. Press it three times andsubtitle banner will be shown. You can selectthe language you want using up/down keys.DESCRIPTION DESCRIPTION105 11/5/04 11:38 AM Page 8