160System88 System8.12.3 ReceiverSound is played through the receiver.The connected device is notdisplayed. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+setup menu. Search Anynet+ devices again. Anynet+ requires an HDMI connection. Make sure the device isconnected to your product with an HDMI cable. Some HDMI cables may not support Anynet+ functions. If the connection is terminated because there has been a powerfailure or the HDMI cable has been disconnected, please repeatthe device scan.The product sound is notoutput through the receiver. Connect the optical cable between product and the receiver.Problem Possible Solution
