40SELF-TIMER / REMOTE buttonWhen the menu is displayed on the LCD monitor, pressing the RIGHT button makes the cursor shiftto the sub menu.When the menu is not displayed on the LCD monitor, the RIGHT button operates as the SELF-TIMER ( ) / REMOTE ( ) button.Selecting the self-timer1. Rotate the mode dial to the RECORDING ( except VOICE RECORDING) mode.2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor.- Selecting the self-timer mode : Pressing the shutter button will allow an interval of ten secondsbefore the image is taken. After that, the self-timer is cancelled.- Selecting the remote mode : Pressing the shutter button in the remote controller will allow aninterval of 2 seconds before the image is taken.In the remote mode, you cannot use the shutter button.Selecting the 2sec. self-timer mode Selecting the remote modeSelf-timer/ remote mode definitionIndicator Mode Definition2s Pressing the shutter button will allow an interval of 2 seconds before the image is taken.10s Pressing the shutter button will allow an interval of 10 seconds before the image is taken.Remote mode You can take a picture with the remote controller.
