56White BalanceThe white balance control allows you to adjust the colors to appear more natural looking.1. Rotate the mode dial to the RECORDING mode and press theMENU button.2. Press the DOWN button and the cursor will be shifted to the mainmenu.3. Select the [SHOOTING] menu by pressing the UP/DOWN button.4. Press the DOWN button on the [SHOOTING] menu and the nextmenu page will be displayed.5. Select the [W.B] menu by pressing the UP/DOWN button.6. Press the RIGHT button and the cursor will shift to the [W.B] sub menu.7. Select the desired sub menu by pressing the UP/DOWN button.- AUTO : The camera automatically selects theappropriate white balance settings, dependingon the prevailing lighting conditions.- DAYLIGHT : For taking images outside.- CLOUDY : For taking images under a cloudy andovercast sky.- FLUOR. : For shooting under fluorescent lighting.- TUNGSTEN : For shooting under tungsten (standard light bulb) lighting.8. Press the OK button to confirm the setting.Press the menu button twice and the menu display will disappear. Take a picture.INFORMATIONDifferent lighting conditions may cause a color cast on your images.When the power is turned off, the changed setting value returns to the initial value.BACK:PROG SETUP MyCAMSET:OKISOW.BEFFECTSHARPAUTODAYLIGHTCLOUDYFLUOR.EXIT:MENUPROG SETUP MyCAMPAGE:SIZEQUALITYMETERINGSHOOTING2272x1704FINEMULTISINGLE
