《54》Starting the slide show■ Images can be displayed continuously at pre-set intervals.1. Press the play mode button and press the menu button.2. Press the LEFT/ RIGHT button and select the [SLIDE]menu tab.● Setting play interval: Set the slide show play interval.1. Use the Up/Down buttons to select the [INTERVAL] menuand press the Right button.2. Use the Up/Down buttons to select the desired interval.3. Press the OK button to save the configuration.● Repeat setting : Repeat or not the slide show after finishing the first cycle.1. Use the Up/Down buttons to select the [REPEAT] menu and press the Right button.2. Use the Up/Down buttons to select the desired sub menu.[OFF] Selected : The slide show is closed after one cycle.[ON] selected : The slide show is repeated until cancelled.3. Press the OK button to save the configuration.● Start the slide show: The slide show can start only in the [START] menu.1. Use the Up/Down buttons to select the [START] menu.2. Press the OK button to start the slide show.- Press the Pause button to pause the slide show.- Press the Pause button ( ) again to resume the slide show.- Press the Menu button to stop the slide show.● The loading time depends on the image size and quality.● While the slide show is playing, only the first frame of a movie file is displayed.In case of a voice file, the voice recording icon will appear.INFORMATION2048◀ ▶SLIDEINTERVALREPEATSTART1 SECONEXIT:MENU MOVE: ▲▼
