Samsung DIGIMAX A302 User Manual

Contents

Samsung DIGIMAX A302 User Manual Manual pdf 74 page image

《74》Beep■ If you set the operation sound to ON, various sounds will be activated for camera startup,when button are pressed, and if there is a card error, so that you can be aware of the cameraoperation status.■ The alternating current frequency influences the image quality.If you don't select the same [FREQUENCY] sub menu as your nation's alternating currentfrequency, there will be a line on a stored image. Should this be the case, change the[FREQUENCY] sub menu.● Setting Operation Sounds1. In any mode with the exception of Voice Recording mode,press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [BEEP] menu by pressing the UP/ DOWNbutton and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.[BEEP] sub menu : OFF/ ON5. Press the menu button twice and the menu will disappear.● Selecting frequency type1. Press the MENU button.2. Press the LEFT/ RIGHT button and select the [SETUP]menu tab.3. Select the [FREQUENCY] menu by pressing theUP/ DOWN button and press the RIGHT button.4. Select a desired sub menu by pressing the UP/ DOWNbutton and press the OK button.- [FREQUENCY] sub menu : 50Hz, 60Hz5. Press the menu button twice and the menu will disappear.● 60Hz : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.● 50Hz : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,Thailand, Norway.2048◀ ▶SETUPDATE TYPEIMPRINTBEEPOFFONBACK:◀ SET:OK2048◀ ▶SETUPIMPRINTBEEPFREQUENCY50Hz60HzBACK:◀ SET:OKFrequency