《28》Self-timer ( ) / Right button● Selecting the self-timer1. Select the MOVIE CLIP or STILL IMAGE mode bypressing the mode button.2. Press the SELF-TIMER button until the desired modeindicator displays on the LCD monitor.A 2 second, 10 second or double self-timer icon appearson the LCD monitor. In Movie Clip mode, only the10-second self-timer will work.·2SEC self-timer ( ) :Pressing the shutter button will allow an interval of 2seconds before the image is taken.·10SEC self-timer ( ) :Pressing the shutter button will allow an interval of 10seconds before the image is taken.·Double self-timer ( ) :A picture will be taken after about 10 seconds and 2seconds later a second picture will be taken.When using the flash, the 2-second self-timer may bedelayed for longer than 2 seconds depending on the flash charge time.3. When you press the SHUTTER button, the picture will be taken after the specified timehas elapsed.■ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursorshift to the right tab.■ When the menu is not displayed on the LCD monitor, the RIGHT button operates as theSelftimer( ) button. This function is used when the photographer would also like to be inthe image.[ Selecting the 10 SEC self-timer ]● When taking a picture using the self-timer, the self-timer lamp works as follows:2 second self-timer setting : The self-timer lamp blinks at 0.25 second intervals for 2seconds.10 second self-timer setting : The self-timer lamp blinks at 1 second intervals for the first7 seconds. It blinks at 0.25 second intervals for theremaining 3 seconds.● If you operate the Power button, Self-timer button and shutter button during the self-timeroperation, the self-timer function is cancelled.INFORMATION