《64》PictBridge: Picture Selection■ Select pictures to print1. Connect the camera to your printer. The USB menu mustbe set to [PRINTER] before you connect the camera tothe printer.(See p.63)2. The [IMAGES] menu will appear.3. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.When [ONE PIC] is selected : The PictBridge functionwill be applied only to thepicture currently displayed.When [ALL PICS] is selected : The PictBridge function will be applied to all pictures,excluding movie clips and voice files.[ When [ONE PIC] is selected ] [ When [ALL PICS] is selected ]- Press the Up/Down button to select the number of prints. Maximum 30 prints.- Use the Left/Right button to select another picture and select the number of prints foranother picture.- After setting the number of prints, press the OK button to save.- Press the Shutter button to return to the menu without setting the number of prints.● Setting the Number of Copies to Print- Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of copies to printwill appear as shown below.◀ ▶IMAGESONE PICALL PICSMOVE: SET:OK▲▼00 PRINTSMOVE PIC:◀▶ SET:OKEXIT:SH00 PRINTSEXIT:SH SET:OK
