ŝ19ŞLCD monitor indicatorChanging the recording modeƈ You can select the desired working mode by the M (mode) button located on the back of thecamera and [MODE], [MODE SET] menu. Auto, Program, movie clip, scene (night, portrait,children, landscape, close-up, sunset, dawn, backlight, fireworks, beach & snow) cameramodes are available.STILL & MOVIEFULLCUSTOMMODE17 Image quality p.53Number of available shots remaining 15 p.16Remaining time (Movie clip/ Voice recording) 00:01:30/ 01:00:00 p.1620 Voice memo/ Mic. off p.30/231918 p.52Image sizeOptical/ Digital Zoom bar/Digital Zoom rate21 p.27ƃSelecting the [MODE] menu1. Insert the battery (p.14).2. Insert the memory card (p.17). As this camera has a 10MB internal memory, you do notneed to insert the memory card. If the memory card is not inserted, an image will be storedin the internal memory. If the memory card is inserted, an image will be stored on thememory card.3. Close the battery chamber cover.4. Press the power button to turn on the camera.5. Press the menu button and a menu will display.6. Use the Left/ Right button to select the [MODE] menu.7. Select [STILL & MOVIE], [FULL] or [CUSTOM] sub menuby pressing the UP/DOWN button.- [STILL & MOVIE] : A still image mode that was selected onthe [MODE SET] menu and movie clipmode can be selected.Refer to page 51 for more information about using the [MODE SET] menu.- [FULL] : Auto, Program, Movie clip and scene modes can be selected.- [CUSTOM] : Modes set as on in the [MODE SET] menu can be selected.8. Press the MENU button and the menu will disappear.
