ŝ82ŞPictBridge : PrintingƈPrinting Pictures1. Connect the camera to your printer.The USB menu must be set to [PRINTER] after youconnect the camera to the printer.(See p.79)2. Use the LEFT and RIGHT buttons to select the [PRINT]menu tab.3. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.[STANDARD] : Print the pictures stored in the memory card in set numbers.One picture is printed on one piece of paper.[INDEX] : Print multiple images on one sheet of paper.1. Connect the camera to your printer. The USB menumust be set to [PRINTER] after you connect the camerato the printer.(See p.79)2. Use the LEFT and RIGHT buttons to select the [DPOFPRINT] menu tab.3. Use the UP and DOWN buttons to select the desiredsubmenu value, and then press the OK button.[NO] : Cancel the printing[YES]: Directly print the file with the DPOF informationſ Depending on the manufacturer and printer model, some menus may not be available.With a printer without supporting the DPOF, the menu is still displayed but not available.4. The screen shown on the right will appear and thepicture will be printed. If no picture is selected, the[NO IMAGE!] message will be displayed. Press theshutter button while printing to cancel the printing andthe [IMAGES] menu is displayed.ſ Number of pictures in a index print varies depends onthe printer used.ƈDPOF PRINT : This allows you to directly print the files with DPOF information.NOW PRINTINGEXIT:SH1001/0010PRINTMOVE: ƊƌSTANDARDINDEXDPOF PRINTMOVE: ƊƌNOYES
