ŝ45ŞƈIn Play mode, the play & pause/ down button works as follows:- If the menu is displayedPress the DOWN button to move from the main menu to a sub menu, or tomove down the sub menu cursor.- If a still image with a voice memo, a voice file, or a movie clip is playingIn Stop mode : Plays a still image with a voice memo, a voice file, or amovie clip.During playback : Temporarily stops playback.In Pause mode : Resumes playbackVoice ( ) memo/ Up buttonƈWhen the menu is displayed on the LCD monitor, pressing the UP button makesthe menu cursor move up.ƈWhen the menu is not displayed on the LCD monitor, the UP button operates asthe voice memo button. You can add your voice to a stored still image.ƃAdding a Voice Memo to a Still Image1. Press the LEFT/ RIGHT button to select animage that you wish to add sound to.2. Press the voice memo button ( ) and the voicememo indicator will display. The camera is nowready to record a voice memo.3. Press the shutter button to start recording andvoice will be recorded to the still image for 10seconds. While the voice is recording, therecording status window will be displayed asshown alongside.4. The recording can be stopped by pressing theshutter button again.5. The ( ) icon will be displayed on the LCDmonitor after voice memo recording has finished.- Voice memos can’t be recorded onto movie clipand voice recording files.- A distance of 40cm between you and thecamera (microphone) is the best distance torecord sound.- The voice memo will be saved in ҭ.wav format, but has the same file nameas the still image to which it corresponds.- If you add a new voice memo to the still image that already has a voicememo, the existing voice memo will be erased.Play & Pause ( )/ Down buttonStop:Shutter [Voice recording is stopped] [Voice recording is playing] [Voice recording is paused]PLAY: PLAY:..:-?STOP : OKPAUSE: EXIT:OK